[leis]

CCCam 2.1.2 Addon E1 NABILO


This package will automatically install CCcam 2.1.2 to your DM equipped with Nabilosat Enigma1 images.
The full package includes the CCcam.cfg file and your current CCcam.cfg file will be replaced.
The onlybin package does not include the CCcam.cfg file. It includes the bin file only and your current CCcam.cfg file will not be replaced.

Download

---------------------------------------

CCcam 2.1.1 ( Nabilosat E2 )


This package will automatically install CCcam 2.1.1 to your Dreambox equipped with Nabilosat Enigma 2 image.
The full package includes the CCcam.cfg file. Your current CCcam.cfg file will be replaced. If necessary, take a backup.
The only bin package does not include the CCcam.cfg file.

Also available in the Green panel for direct download to your DM.
Change Log 2.1.1
-fixed MINIMUM CLIENT VERSION check, broken since 2.1.0
-several smartcard fixes

Download

[piwi]

Użytkownik @Zico dnia 07 sierpień 2009 - 19:21 napisał

camd3 3.908L Client Version

Download

Camd3.908L - Complete


Ab Gemini 3.x
Addon nach tmp kopieren und über Blue-Panel manuell installieren

Dies ist eine Completversion.
Dies enthält nun als folgendes

- camd3 (bin)
- pcamd3 (bin)
- MpCS 1.06 pr3 startscript incl. entsprechenden Uninstallscript (Wer es nicht benutzt)
- Delscript-Complete

Die Config der Emus würden ausgesondert,
somit kann muss man diese bei einer Neuinstallation entweder einmalig installieren oder Manuell erstellen.

Dies hat dann der Vorteil dass man nun Keys und Emus gefahrlos updaten kann ohne dass eine individuell vorhandene Einstellung überschrieben wird.

### Ist nur eine Klient Version! ###

Download: Camd3.908L - Complete

[Dani]

rqcamd-1.31

23/08/2009 v1.31
- Fixed a problem in the EMM processing section that caused *some* EMM's to not
be sent to the server by rqcamd (thus causing partially updated tiers), specially
when connected to servers with considerable load.

- Console logs now show server ECM response time.

rqcamd-1.31

[@Zico]

DCCamd 1.1-r4 for DM 7025/800/8000

dreambox-dccamd_1.1-r4_dm7025.zip
dreambox-dccamd_1.1-r4_dm800.zip
dreambox-dccamd_1.1-r4_dm8000.zip

[@Zico]

mgcamd-1.33 & Newcs-1.67

----------------------------------

27.08.2009

mgcamd-1.33 for sif image

Download

[ogo]

Mgcamd-1.33 for E2


# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 12 Fortis
B: { 12 }


======================

For Enigma2 B:{ 11 }


thx goes 2 sifteam

Download

[piwi]

CCcam 2.1.2 for MiLo images E2

Download

[piwi]

Oscam Dreambox


For those who want to test this new cardreader:
The file I posted is for a dreambox with
two cardreader:
Slot under sky_ita ->> does not work
Slot above rai_fun ->> works
#####
To test other cards you have to change all
and three configuration files:

oscam.user
oscam.server
oscam.conf

Reads in the files and understand how!

Oscam_Dreambox

[@Zico]

CCcam 2.1.3

-important cardreader fixes
-DRE crypt support
-963 support
-reenabled n2 emu

CCcam 2.1.3_komplett ( E1 + E2)

[adas]

Oscam r517p4

Sky IT fix

Download

Załączone pliki

•  Screen shot 2009-11-19 at 7.04.14 PM.png (400,79 KB)
  Ilość pobrań: 22
•  Screen shot 2009-11-19 at 7.03.33 PM.png (359,01 KB)
  Ilość pobrań: 22

[piwi]

oscam-0.99.4svn589-i686-pc-linux

[piwi]

Scam 3.55 E1 (Nabilo Autoinstall Package)


This package will automatically install Scam 3.52 to your Dreambox
equipped with Nabilosat Enigma 1 image.
The package includes the config file. Your current config file will be replaced.

Change Log v3.55

Sky Italia fixed

Not tested as I do not have card to test so please report back as soon as you can.

Thanks to piefav for the original files.

<LINK>

[piwi]

oscam-0.99.4.681

Fix Typo 

oscam_0.99.4.681svn_i686_pc_linux.gz
oscam-0.99.4.681svn-mipsel-tuxbox-linux.gz
oscam-0.99.4.681svn-ppc-tuxbox-linux.gz

oscam-0.99.4.681_Pack

[Dani]

Scam 3.57 - Complete (DM756XX/7000) Gemini Image

Cytat

Scam v3.57
- fix ecm-server/client
- ecm client disconneted on standby

Download

[ogo]

Scam 3.57 ( Nabilosat E1)


This package will automatically install Scam 3.57 to your DM equipped with
Nabilo Enigma1 images. The package includes the config file. Your current
config file will be replaced. If necessary take a backup of your current
config file before downloading and installing this package.

What's new?
* fix ecm-server/client
* ecm client disconneted on standby
* config modified by sloggo for home network -
for more info visit Nabilosat Board

Many thanks to sloggo for the cfg

Enjoy Nabilosat images.



Download

[ogo]

CCcam Files 2.1.4


Für Gemini e1

Cytat

2.1.4

-ndz smartcard fixes
-ecm timeout decreased
-via26 emu
-seca handler improvement

Download

[leis]

Cccam 2.1.4 for Sif Image

DOWNLOAD LINK

[adas]

Hypercam 1.10

Release 1.10
--------------
=> Performance enhancement, now able to support more than 1000 connection on
single server on strong machines.
=> Fixed operations on qboxhd, thanks to one member of the team (but this
receiver still sucks !)
=> Fixed operations on Marusys VU+ Duo. Should now support smartcard readers.
=> Fixed ATR handling, causing in some case memory leak
=> Added DRE support...but not tested !
=> Fixed NDS operations for Sky
=> Fixed peer file support, was updating too often...
=> Fixed card reset logic. Should work find everywhere now.

Download

Narazie Adas

[adas]

Hypercam 1.11 ppc only

Hypercam 1.11

28.02.2010

--------------
Release 1.11
--------------
=> Remove some optimization options that produce unstable versions
=> Fixed *** operations for Sky again

Download

Narazie Adas

[piwi]

oscam-svn2012-gbx-5.8-full-Distribution

r2012 | dingo35 | 2010-04-08 04:43:07 -0700 (Thu, 08 Apr 2010) | 1 line

sc8in1: prevent unwanted ATR by keeping DTR set in init phase
------------------------------------------------------------------------
r2011 | dingo35 | 2010-04-08 04:22:46 -0700 (Thu, 08 Apr 2010) | 1 line

sc8in1: move GetStatus init to more logical place
------------------------------------------------------------------------
r2010 | dingo35 | 2010-04-08 04:04:08 -0700 (Thu, 08 Apr 2010) | 1 line

sc8in1: fix setting dtr after restoring termio
------------------------------------------------------------------------
r2009 | dingo35 | 2010-04-08 03:26:16 -0700 (Thu, 08 Apr 2010) | 1 line

io_serial.c: fix wrong endif + improve rts/dtr debug messages
------------------------------------------------------------------------
r2008 | dingo35 | 2010-04-07 07:13:06 -0700 (Wed, 07 Apr 2010) | 1 line

Fix cccam client signal 11 crash when hostname cannot be resolved
------------------------------------------------------------------------
r2007 | dingo35 | 2010-04-07 05:51:26 -0700 (Wed, 07 Apr 2010) | 1 line

Fix x86 + pcsc compiler error thanks to tanica76
------------------------------------------------------------------------
r2006 | dingo35 | 2010-04-07 03 :56 -0700 (Wed, 07 Apr 2010) | 1 line

SB1913 small fix for cccam
------------------------------------------------------------------------
r2005 | dingo35 | 2010-04-07 03:09:28 -0700 (Wed, 07 Apr 2010) | 1 line

Add emm type description in human readable form, approx. SB 1931/1835 _except_ 1886
------------------------------------------------------------------------
r2004 | dingo35 | 2010-04-07 02:57:46 -0700 (Wed, 07 Apr 2010) | 1 line

SB 1899, 1992: fix dorcel de04 bug
------------------------------------------------------------------------
r2003 | dingo35 | 2010-04-07 02:54:16 -0700 (Wed, 07 Apr 2010) | 1 line

SB 1921 fix conax hexserial in get_emm_type
------------------------------------------------------------------------
r2002 | dingo35 | 2010-04-07 02:51:47 -0700 (Wed, 07 Apr 2010) | 1 line

SB 1915: add send_emm function to camd35 protocol
------------------------------------------------------------------------
r2001 | dingo35 | 2010-04-07 02:10:55 -0700 (Wed, 07 Apr 2010) | 1 line

dvbapi SB 1878, 1883, 1891, 1898, 1918, 1957, 1983
------------------------------------------------------------------------
r2000 | dingo35 | 2010-04-07 01:37:30 -0700 (Wed, 07 Apr 2010) | 1 line

SB 1877: dvbapi: fix selection of caid and descrambling with multiple ecmpids for one caid
------------------------------------------------------------------------
r1999 | dingo35 | 2010-04-06 04:41:52 -0700 (Tue, 06 Apr 2010) | 1 line

Fix sc8in1 clock setting

oscam-svn2012-gbx-5.8-full-Distribution.tar

[piwi]

oscam-svn2012-full-Distribution

r2012 | dingo35 | 2010-04-08 04:43:07 -0700 (Thu, 08 Apr 2010) | 1 line

sc8in1: prevent unwanted ATR by keeping DTR set in init phase
------------------------------------------------------------------------
r2011 | dingo35 | 2010-04-08 04:22:46 -0700 (Thu, 08 Apr 2010) | 1 line

sc8in1: move GetStatus init to more logical place 

oscam-svn2012-full-Distribution.tar